There are many ways to make a trampoline on Scratch. The most popular way is to use the ‘Sprite’ tool and the ‘Stage’ backdrop. Other ways include using the ‘Pen’ tool, or the ‘Line’ tool.

You can also use the ‘Text’ tool to create a trampoline.

When you want to make a trampoline on Scratch, there are a few things you need to do. First, create a new project and name it “Trampoline.” Next, open the project and add a background.

You can use any color you like, but we recommend using green or blue. Now it’s time to add the sprites. For the trampoline itself, we recommend using the “Rectangle” sprite.

You can find this under the “Shapes” tab in the Sprite Editor. Once you have your Rectangle sprite, resize it so it’s about 1/4 the size of your Stage. Now that you have your Rectangle sprite set up, it’s time to add some code!

In order to make your trampoline work, we’ll need to use two blocks: when [space key] pressed and forever . The first block will make our trampoline bounce when we press the spacebar; the second block will make our trampoline continuously bounce even after we let go of the spacebar. To start off, drag out a when [space key] pressed block from the Events section and snap it below your forever block.

Then, insert a move () steps block inside of the first one and type 10 into the blank space (this is how many pixels our Rectangle sprite will move up each time we press the spacebar).

How to make a Trampoline script on Scratch

How to Make a Trampoline in Minecraft

Minecraft is a game all about creativity and building, so it’s no surprise that many players want to know how to make their own trampoline in the game. While there is no one specific way to do this, we’ve compiled a few tips to help you get started. First, decide where you want to place your trampoline.

It’s important to pick a safe spot away from any cliffs or hostile mobs. Once you’ve found the perfect location, start by building a frame for your trampoline using blocks of your choice. You can make it as big or small as you like, but keep in mind that the bigger the trampoline, the more fun it will be!

Next, add some slabs or other blocks on top of the frame to create a flat surface for jumping. For extra bounciness, try adding slime blocks or honey blocks to the mix. Finally, finish things off by adding a sign with the word “Trampoline” or “Jump!” written on it.

Now you’re ready to bounce around and have some fun!

How to Make a Trampoline Out of Paper

You may be surprised to learn that you can make a trampoline out of paper. This can be a fun project for kids or adults, and it’s actually quite simple to do. Here’s how to make your own paper trampoline:

1. Cut two pieces of paper into identical circles. Make sure the diameter of the circle is slightly larger than the height of your desired trampoline. 2. Place one piece of paper on top of the other and staple them together around the edge about six times.

3. Cut eight strips of paper, each about three inches wide and 18 inches long. Fold each strip in half lengthwise and staple the ends together to form loops. 4. Attach four loops to each side of the stapled circles, evenly spacing them out.

Make sure that the loops are facing outward so that they will act as springs when you jump on the trampoline. 5. That’s it!

How to Make a Trampoline at Home

Are you looking for a fun and unique project to take on this weekend? If so, why not try your hand at making your very own trampoline! With just a few supplies and some elbow grease, you can easily construct a safe and functional trampoline right in your own backyard.

Here’s what you’ll need to get started: 1. A large piece of heavy-duty fabric. This will be the jumping surface of your trampoline.

2. Several long lengths of sturdy rope or twine. 3. A circular frame made from either metal or strong wood. This can be an old bicycle wheel rim, for example.

4. Springs (optional). These can help add more bounce to your trampoline, but they’re not absolutely necessary. 5. Heavy-duty adhesive or stapler (optional).

This will be used to attach the fabric jumping surface to the frame. 6 Once you have all of your supplies gathered, it’s time to start construction! First, secure the fabric to the top side of the frame using either adhesive or staples.

Make sure that the fabric is stretched taut so that there are no wrinkles or sags in the material; otherwise, someone could easily trip while jumping on the trampoline. Next, tie ropes around the circumference of the frame at evenly spaced intervals; these will act as supports for the fabric when someone is using the trampoline . Finally , if you’re using springs , attach them now between each support rope and the bottom side of the frame .

And that’s it – your homemade trampoline is now ready for use ! Just make sure that only one person jumps on at a time , and keep an eye on anyone who is using it to make sure they don’t injure themselves . Have fun!

Where to Buy a Trampoline

trampolines are a great way to get some exercise, have fun, and entertain guests at parties or other events. But before you can enjoy all that a trampoline has to offer, you need to purchase one. This can be tricky, as there are many different types of trampolines on the market, each with its own set of features and price tag.

To help you make the best decision possible, we’ve put together this guide on where to buy a trampoline. We’ll cover the most important factors to consider when shopping for a trampoline, as well as our top three picks for where to buy a trampoline. By the end of this article, you should have everything you need to make an informed decision about which trampoline is right for you.

So without further ado, let’s jump into it! The first thing you need to consider when purchasing a trampoline is what size do you need? Trampolines come in a variety of sizes ranging from small round ones meant for 1-2 people all the way up to large rectangular ones that can accommodate 6-10 people or more.

The size of the trampoline will impact both the price and how much space it will take up in your yard or indoors if you’re planning on keeping it inside. Another factor to keep in mind is what type of jumping surface do you want? There are two main types of jumping surfaces: spring-loaded and mat-based.

Spring-loaded surfaces give users more bounce than mat-based ones but they also require more maintenance as the springs will eventually lose their elasticity over time. Mat-based surfaces provide a steadier jump but don’t tend to last as long as spring-loaded ones since they don’t have any springs providing support. Ultimately, it comes down to personal preference so try out both types before making your final decision.

Finally, consider what kind of safety features you want in your new trampoline. Many models come with safety netsting surrounding the entire perimeter which is great for preventing accidental falls off the edge while still allowing users full range of motion while jumping around inside. Some even come with ladders attached so users can easily get back onto the platform if they happen fall off (though this isn’t always necessary).

How Do You Make a Trampoline on Scratch


How Do You Make a Sprite Bounce from a Trampoline in Scratch?

In order to make a sprite bounce from a trampoline in Scratch, you will need to use the “bounce” block. This block is found under the “More Blocks” category. When you add the “bounce” block, you will need to specify the sprite that you want to bounce and the height that you want it to bounce.

For example, if you wanted your sprite to bounce two feet off the ground, you would type in “2” for the height. You can also adjust how much force is applied to the sprite when it bounces by changing the number in the “force” field. A higher number will result in a more powerful bounce, while a lower number will result in a softer bounce.

Once you have added all of your desired settings, simply click on the “run” button and watch your sprite take flight!

How Do You Make a Jumping Scratch Game?

Assuming you would like a tutorial on how to create a basic jumping scratch game: 1. Go to and create an account or sign in if you already have one. 2. Once you’re signed in, click on the “Create” button in the top right-hand corner of the page.

3. A new page will pop up with different project options; select “Create New Project”. 4. You will be brought to a blank project page with different coding blocks on the left side and a stage in the center where your sprite (the character) will move around. If there are no coding blocks visible, click on the “See More Blocks” button at the bottom of the coding blocks section.

5. Find the block that says “When [green flag] clicked”, drag it onto the scripts area (the large white space), and release it when you see a green plus sign appear; this means that you’ve successfully attached the block to your script . 6. Click on the double arrow inside of this block–this will bring up all of your available sprites so that you can choose which one you’d like to use for your game; select your sprite and press OK . Now, every time you click on the green flag, this sprite will appear on stage .

7. To make your sprite move using code, find these two blocks: “move 10 steps” and “turn 15 degrees”; attach them together by dragging one underneath of another until you see a small black circle appear between them . Then test out your code by clicking on each block once (or holding down Shift while clicking each block) so they turn blue , which means they’re ready to run , then click on the green flag . Your sprite should now move across stage!

How Do You Jump in Griffpatch on Scratch?

In order to jump in Griffpatch on scratch, you will need to use a Scratch extension. There are a few different ways to do this, but the easiest way is to download the “Jump In” extension from the Scratch website. Once you have downloaded and installed the extension, simply open up any project in Griffpatch and click on the “Jump In” button.

This will launch a new window where you can enter your username and password. After you have logged in, you will be able to access all of your projects and jump into any of them with just a few clicks!


In this blog post, the author explains how to make a trampoline on Scratch. First, the player needs to create a new sprite and name it “Trampoline.” Then, they need to draw the trampoline using the paint editor.

The next step is to add the following code: when green flag clicked forever if then set [bounce v] to (rand (1) + 1) * -10 end When the player clicks on the green flag, the code will cause the sprite to bounce up and down randomly.

Similar Posts