A trampoline is a great way to get exercise without having to go outside. But sometimes, you may need to replace a part on your trampoline.

It’s not always easy to find replacement parts for trampolines. And even if you do find them, you might not know exactly which ones you need. In this article, I’ll explain how to measure a tramping pole for replacement parts like safety nets, enclosures, v-springs and mats.

Measuring Octagonal Trampolines

Octagonal trampolines are great because they’re versatile and can be used indoors or outdoors. But measuring them is tricky.

Trampoline manufacturers usually include a measurement chart with each trampoline. Unfortunately, these charts aren’t standardized across brands. So, when replacing a trampoline, you may need to purchase additional parts based on measurements found on the manufacturer’s chart.

To avoid this hassle, use a tape measure to determine the length and width of the trampoline. Then, multiply those numbers together to find the area of the trampoline (in square feet). This method works well for any octagon shape, including round ones.

Measuring Circular Trampolines

Circular trampolines are fun toys that allow kids to jump into the air while bouncing off the ground. These bouncers are easy to set up and require minimal maintenance. But how do you know whether or not your circular trampoline is safe enough for children?

There are several factors that you should consider when measuring a circular trampoline. First, look at the manufacturer’s safety guidelines. Next, look at the height of the jumping surface. Finally, look at the diameter of the circle. Make sure that the diameter is large enough to accommodate a child’s body.

To measure the diameter of your circular trampoline, stand next to it and count the number of feet between your two hands. Then multiply that number by 2.5 to calculate the circumference. This measurement will tell you how wide the jumping area is.

Next, measure the height of the jumping platform. Stand next to the trampoline and hold your arms straight out in front of you. Place your thumbs together and then place your fingers apart. Count the number of inches between your thumb and finger tips. Multiply that number by 0.75 to calculate the height of the jumping area.

After calculating both measurements, compare them to the manufacturer’s recommendations. If the measurements fall within the recommended range, you’re ready to enjoy your circular trampoline. Otherwise, you may want to invest in a different model.

Measure Rectangular Trampolines

A trampoline is a great way to enjoy outdoor fun without having to worry about getting hurt. But there are many different types of trampolines out there, some rectangular, others circular. Knowing what size trampoline you need can help you make the best decision.

To measure the diameter of a round-shaped trampoline, use a tape measure. Start by placing one end of the tape measure against the edge of the trampoline frame where the springs meet. Then move the tape around the entire perimeter of the trampoline to find the widest part. This measurement is called the diameter. For example, a 12′ x 24′ trampoline might have a diameter of 48″.

For a rectangular trampoline, place the tape measure along one side of the rectangle and take note of the width. If the trampoline is 16 feet wide, then the diameter is 8′. To calculate the length of the trampoline, divide the width by 2 and add 4 inches. So if the trampoline is 14 feet long, the diameter is 7′, and the total length is 21 feet.

If you want to know how tall you’ll be able to jump, check the height of the trampoline. Most trampolines are designed to accommodate people up to 5’8″, so you can’t go much taller than that. However, you may be able to jump higher if you buy a trampoline with longer legs.

The measurements don’t include the spring padding, which adds another inch or two to each dimension. Also keep in mind that the larger the trampoline, the heavier it will be. You’ll notice that most manufacturers recommend buying a smaller version of their trampolines.

Measuring Oval Trampolines

Oval trampolines are a popular choice among backyard enthusiasts. But measuring an oval trampoline can be tricky. Here are three tips to help you accurately measure your trampoline.

1. Start by laying down a piece of tape along the edge of the mat. Then place another piece of tape perpendicular to the first piece. Measure the distance between the two pieces of tape. This measurement represents the length of the trampoline.

2. Next, lay down a third piece of tape parallel to the second piece. Measure the distance from the center of the first piece of tape to the middle of the second piece of tape. This measurement indicates the width of the trampoline mat.

3. Finally, measure the height of the trampoline frame. Lay down a fourth piece of tape directly above the third piece of tape. Measure the distance from one end of the third piece of tape to the other. This measurement shows the height of the tramping surface.

4. Now that you have the measurements, you can calculate the area of the trampoline by multiplying the length x width x height.

5. Once you have the dimensions, you can purchase replacement parts online or visit a local store to buy a new mat or frame.

Measurement for safety mats

The mat industry uses different measurements depending on what type of product you’re buying. You’ll want to know how big your mat needs to be. Here’s how to do that.

Frame size

Most parts on a trampoline are interchangeable between brands. This includes springs, frames, bumpers, netting and poles. However, you should always check the size. A smaller frame may make it easier to get into the center of the bounce area, but it will limit how high you can jump. If you want to jump really high, look for a larger frame.

Trampolines come in several sizes. There are small trampolines, medium sized trampolines and large trampolines. Smaller trampolines usually cost less money, but they don’t offer much space for jumping. Medium sized trampolines provide more room for jumping, but they’re often too big for some backyard spaces. Larger trampolines give you plenty of room to play, but they can be expensive.


A trampoline without v-rings will wobble and jump erratically. They are used to stabilize the trampoline and prevent it from moving too much during use.

Spring size

Overstretched springs mean your mats don’t fit correctly. If you’ve got a springer mattress, chances are it doesn’t fit well enough. Mattresses come in different sizes and shapes, so measuring all three springs before calculating mat width is important. Spring sizes vary between brands, too.

Measure all three springs before calculating your mat width.

How to Measure A Trampoline Net

Trampolines are great fun, but they can be dangerous if you don’t know what you’re doing. If you’ve never measured a trampoline before, here’s how to do it properly. You’ll want to make sure that you measure the frame diameter ratherthan the circumference. This way you won’t end up ordering a trampoline that’s too small.

Measure the frame diameter by placing one hand inside the frame near the middle and another hand outside the frame near the edge. Then add the width of both hands together. Divide that measurement by 2 to find the actual frame diameter.

Next, take the length of the trampoline and divide it by 3.5 to find the circumference. Add the circumference to the frame diameter to find the total area of the trampoline. This gives you the space needed for jumping.

If you’d like to learn about the best types of trampolines for kids, check out our article on the topic.

How to Measure A Trampoline Pad

Spring covers are usually measured by the outside edge to outside edge measurement of the frame. This includes the springs themselves, the inner padding, and the outer padding. If you don’t want to measure it yourself, you can buy a spring cover online. The next step is to take the measurements from the inside of the frame outwards. This is where you’ll see the difference between different brands of trampolines. Some brands use a thicker foam layer around the springs while others use thinner layers. To determine how thick the foam is, measure the thickness of the foam at the edges of the frame. Then subtract the number from the total length of the frame. For example, if the frame measures 24 inches long and the foam is 3 inches thick, the total length of the spring cover would be 21 inches.

If you want to measure the pad itself, start by measuring the width of the frame. Next, measure the distance across the middle of the frame. Now divide the width of the frame by 2, and add the amount of space between the springs and the inner padding. This is the maximum area of the pad that could possibly be used.

Now that we know the size of the pad, we can figure out how many pads to purchase. Take the number of people who plan on jumping off the trampoline and multiply it by the size of the pad. For example, if there are 4 kids and the pad is 12 inches wide, you’d need four pads.

How to Measure A Trampoline Poles

The trampoline is one of those things you just don’t think about measuring. You’re too busy jumping around. But it turns out there are some important measurements to know.

First, let’s talk about the poles. They come in different sizes and shapes depending on what type of trampoline you buy. If you want to make sure you’re buying the right size, here’s how to do it.

Measure the distance from the ground to where the bottom of the pole meets the ground. This is the height of the pole. Next, find the center of the pole and measure the circumference of the pole. Now divide the number you got in step 2 by 3.5. This gives you the diameter of the pole.

If you bought a trampoline with a round pole, you’ll use the diameter of the pole to figure out if it needs replacing. For example, if the diameter is 5 inches, you’ll need to replace the pole every 20 feet. If the diameter is 4 inches, you’ll need a new pole every 30 feet.

If you’ve ever wondered why trampolines are so bouncy, now you know.

Measuring trampoline enclosures

Measure the height of your tramping area before purchasing an enclosure. You’ll want to make sure you’re able to fit enough padding around the edges to protect the flooring underneath. If you don’t measure correctly, you could end up with a trampoline that doesn’t provide adequate protection against injury.

Count the number of poles needed for your enclosure. This includes the ground spikes, crossbars, and support posts. Most manufacturers recommend that you use three to five poles per side.

Your enclosure should cover all four corners of your trampoline to ensure it provides adequate safety. Make sure you check out our guide on how to choose a trampoline enclosure.

How to Replace Trampoline Springs

Trampolines are fun toys for kids, but they can also pose a safety risk if they aren’t properly maintained. When springs break, they can fly off into nearby trees or other objects, causing injury.

To prevent this from happening, it’s important to replace broken springs as soon as possible. Fortunately, replacing trampoline springs is easy. All you need is a pair of pliers and a few minutes.

Start by opening the spring assembly. Then remove each spring individually and place it in a plastic bag. Once you have all of the springs collected, put them in a bucket or box and label them clearly.

Next, grab a pair of pliers. Open the jaws wide enough to fit over the end of the spring. Grab the spring and pull gently until it pops out of the jaw. Repeat this process for every spring.

After all of the springs have been removed, clean the area thoroughly. Make sure to wash down the frame and surrounding areas with soap and water. Finally, apply a coat of clear sealant to protect against rust and corrosion.

When Should I Replace My Trampoline Springs?

Trampolines are great fun, especially when you’ve got kids running around on them. But it’s important to remember that there are some things you shouldn’t do while jumping on a trampoline. If you want to keep your trampoline safe, here are three signs that it needs to be replaced.

1. When your springs start squeaking

If your springs start making loud noises, it could mean that they need replacing. This usually happens because the rubber coating wears down over time, causing friction and noise. Replacing your springs is easy enough; just follow our guide to changing trampoline springs.

2. When your springs don’t bounce quite as high anymore

This one might seem obvious, but if you notice that your spring height isn’t what it used to be, it could indicate that something is wrong. You should always check the tension on your springs, and make sure that they aren’t loose. Loose springs are dangerous because they can cause injuries to people on the ground.

3. When your springs don’t bounce at all

You probably won’t think twice about this one, but if your springs stop bouncing altogether, it could be a sign that they need replacing. Check the tension on your springs again, and make sure that everything is tight.

Which Tools are Needed to Replace Trampoline Springs?

Trampolines are fun and exciting toys for kids, but unfortunately, they aren’t always safe. When springs break, they can fly off into the air and injure children who jump on them.

To prevent injuries, it’s important to replace broken springs as soon as possible. There are several different types of springs used in trampolines, including steel, nylon, and polypropylene. Each type has its own pros and cons, so it’s important to choose the correct spring based on the needs of your trampoline.

There are two main methods for replacing springs: DIY and professional. Both require the purchase of specific tools and supplies, but each method has its advantages and disadvantages.

DIY Method Pros:

• No special skills required


• Requires purchasing multiple tools

• May result in damage to surrounding area

Professional Method Pros:

• All necessary tools included


• More expensive

• Takes longer to complete

It’s important to consider both the cost and convenience of the project when choosing whether to DIY or hire someone else to install the springs.

For example, if you plan to replace the springs yourself, you’ll likely need to buy a few tools, such as pliers, wire cutters, screwdrivers, and a hammer. However, if you decide to hire a contractor, you’ll probably need to provide him or her with the same equipment.

In addition to the tools needed to perform the job, you’ll also need to pay for labor costs. Depending on the number of springs involved, hiring a professional could end up costing anywhere from $50-$100.

While DIY projects might seem appealing, it’s best to avoid them unless you have experience working with metal. Because trampolines are heavy, they can easily bend or crack if improperly handled.

Instead, opt for a professional installation if you’d rather save money and enjoy peace of mind.


In conclusion, if you have a trampoline but aren’t sure which size replacement parts you should buy, here’s a handy guide to measuring your current trampoline for the right replacements. Just follow the steps below, and you’ll be well on your way to replacing your old parts with new, high-quality parts that will last for years to come.

Similar Posts